Read This Before You Buy Ductless Ac

Central-air systems send refrigerant to a bulky central air handler that then blows cool air into the house through a network of ducts. Ductless systems pump refrigerant to compact indoor units within individual rooms. Each split AC unit operates like a miniature air handler, delivering cold air into its own zone only when it’s needed. Because there are no ducts, these systems don’t have the air leaks, heat gains, or pressure imbalances that can undermine the efficiency and comfort of a central-air setup. And installation is a snap. It’s far easier and faster to fish a narrow bundle of insulated refrigerant lines through a house than to retrofit bulky HVAC ducts.

How to Install a Whole-House Ductless System

Ductless vs. Central Air Conditioning Systems

You’re likely to save 30% of electricity by replacing window AC units with a ductless system. Coincidentally, that’s also about how much cooling is typically lost in central-air systems, thanks to leaky, poorly insulated ductwork.

What to Know About Ductless AC

Cost: A single-zone system with one indoor unit starts around $3,000, including installation. A four-zone system costs about $12,000, installed. Installation: You’ll need a pro to mount the indoor and outdoor units and connect the 2½-inch-wide bundle of refrigerant lines and electric cables. Maintenance: The filter on each indoor unit should be removed and cleaned every month. Once a year, have a technician check refrigerant pressure and flush condensate lines. Noise: Indoor units have whisper-quiet squirrel-cage fans driven by long-life DC motors. Decibel ratings run at about 25, roughly the same as rustling leaves. Warranties: Coverage ranges from 5 to 12 years, but you can expect this sort of mechanical equipment to last 15 to 20 years before it needs to be replaced. Rebates: A few utilities offer rebates for installing ductless AC systems. Many more incentives are available for heat-pump systems. To see whether you might be eligible, go to energystar.gov/rebate-finder. Sizing: Beware of installers who size a split AC unit using a rule-of-thumb estimate. More often than not, the result is oversize equipment that’s costly to operate and can’t effectively reduce humidity levels. Instead, insist on a “Manual J” heat-load calculation. It figures system size based on math and factors such as climate, insulation levels, and sun exposure.

Efficiency vs. System Cost

All cooling systems carry a Seasonal Energy Efficiency Ratio (SEER) rating, which compares cooling capacity with the amount of electricity used over the course of a typical cooling season. Ratings on today’s systems range from 13 to 33 SEER. As the graph below shows, the higher the rating, the more you’ll pay for your system, and the lower your electricity bills will be come summer. To see what effect SEER ratings have on estimated operating costs in your area, go to the central AC life-cycle cost calculator at energystar.gov. System prices come from acwholesalers.com.

• Based on a 1-ton system in St. Louis at 12 cents per kWh ** Calculated from 1-ton pricing

What’s a ton?

In the parlance of air-conditioning, a ton is not a measure of weight; it’s a measure of cooling capacity. One ton of cooling extracts 12,000 Btus per hour from a space. That’s enough heat to melt 1 ton of ice within 24 hours, hence the connection between weight and comfort. The capacity of ductless systems ranges from 3⁄4 to 4 tons.

Air Quality for Ductless AC

All indoor split AC units include mesh filters that collect dust. But some, such as Mitsubishi Electric’s, also offer filters treated with enzymes, to break down allergens like pet dander and dust mites, as well as ceramic filters embedded with platinum catalysts that neutralize odors.

Whole-House Cooling

At first, ductless systems were simple, single-room affairs, often installed as replacements for window air conditioners. But now some outdoor units, like the ones made by Carrier, have grown so powerful they can supply refrigerant to as many as nine separate indoor units. Amazingly, each unit in one of these “multi-split” systems still operates independently. When it comes to customized zoning, this option is hard to top.

Heat Pumps: the All-Season Option

Ductless systems can produce both hot and cold air if you get a heat pump for the outdoor unit. Its key component is a reversing valve, which switches the direction of the refrigerant flow to suit the season.

Who does the work? Manufacturer websites can pinpoint experienced installers in your area, and are a good place to start your search. Where should the outdoor unit go? It will perform best in a shady location—the north side of a house or under a deck—as long as there’s enough clearance for airflow and maintenance. Where should the indoor units go? Wall-mounted units are easiest to install when located on an exterior wall near the outdoor unit. It’s more challenging to connect the refrigerant lines to units mounted on interior walls, but since those lines run as much as 165 feet in length, it’s not impossible. How long does it take? A system with one wall-mounted unit can be installed in about 4 hours. Each additional unit adds another 2 hours. Ducted and ceiling units are more time-consuming.

Heat pumps in the North

Time was, heat-pump systems made sense only where temps didn’t dip below freezing on winter nights. But with recent advancements in compressor technology, units like those made by Fujitsu are able to operate down to −15°F, proving their worth in frigid states from Maine to Minnesota.

Indoor Ductless AC Unit Options

Wall-mounted

The easiest to install and least expensive unit of the group, it is also the most common type. Best for cooling single rooms. Motorized vanes at the bottom of the unit control direction of airflow. Operates at 26 decibels (dB).

Ceiling recessed

Sends air in four directions at the same time, making it a good choice for large, open floor plans. Also called a cassette, it requires nearly 10 inches of clearance above the ceiling. Operates at about 36 dB.

Floor-mounted

Resting on or near the floor, this type directs air toward the ceiling. It’s the easiest unit to maintain, due to its location. (Some units can also be suspended from the ceiling.) Operates at about 35 dB.

Concealed

This least obtrusive option sits above a soffit or ceiling and feeds air to different rooms through as much as 12 feet of hidden ducts; you see only the grilles. The unit must be accessible for servicing. Operates at about 30 dB.

Key Upgrades

Wireless controls: There’s no need for a separate wall thermostat with ductless units—you regulate them with a line-of-sight remote. Some systems, such as LG’s (shown), have Wi-Fi links that put your smartphone in control no matter where you are. Variable-speed compressor: Also known as inverter-driven compressors, they calibrate refrigerant flow to precisely meet indoor cooling needs, putting an end to the uncomfortable up-and-down temperature swings of single- or two-speed units. Variable-speed compressors, like those from Trane, also use less power and last far longer than their fixed-speed counterparts. Sensors: A built-in occupancy sensor, like the ones from Panasonic, maximizes energy savings by ramping up the indoor unit when you enter the room and turning it down when you leave.